Trigger Modes (User Programmable):

Manual trigger - press the scanner button to scan

Flash mode - scanner pulses approx once per second. When barcode is detected, scanner turns on and remains on continuously for fast scanning of subsequent bar codes. If no bar codes are scanned for approx 10 seconds, scanner returns to flash mode.

Continuous scan - scanner always on; scans continuously (Wedge Interface Model Only)

3.0 inch wide scan field at contact; 4.5 inch wide maximum

660nm red LED light source

45 scans per second

Depth of field: Contact to 1 inch (Depending on bar code density).

Power consumption approximately 85Ma

No moving parts

Automatic decoder on Keyboard Wedge and USB models

Rugged enough to withstand multiple 6 foot drops to concrete

3-year warranty

Keyboard Wedge Interface: Single cable and adapter (provided) attach to your system unit and keyboard (PS/2 or PC/AT connector). No additional adapters required. (Some notebook computers REQUIRE that a keyboard be connected to scanner jack - cannot be used with external keyboard port of a notebook computer without using an external keyboard).

USB Interface: Single cable with USB connector attaches to your computer's USB port.

Wand Emulation: Single DB9 squeeze plug attaches to the wand port of your existing decoder. Designed to replace undecoded pen / wand devices